Thread Repair Index

Buy Now
Extractor
service-IMAGE

Should inserts need to be removed. The use of the Powercoil extraction tool is recommended. Extraction tools are simple and easy to use. As correct positioning will make the extraction easier, the tool should be turned 90 from the start of the oil allowing easy winding out of the insert.

Powercoil Gauges
service-IMAGE

Highest pull-out resistance.

Suitable for harder materials.

Superior vibration resistance.

One-step installation.

Available certified to military standards.

Powercoil Thread Repair Kit
service-IMAGE

Range: M2 to M36 & 1/8" to 1.1/2"

Contents: M2-M12 ( 1/8"- 1/2") Kits include Drill, HSS STI Tap, Inserts Installation Tool & Tang breaker. Above size include drill & Tang Breaker.

Spark Plug Kit
service-IMAGE

POWERCOIL is the original spark plug port thread repair. These kits offer the highest quality and most durable repair available. The first choice of professional mechanics and engine rebuilders,

Tang Breakoff Tool
service-IMAGE

The manual PowerCoil Tang Break Off Tool is included in PowerCoil thread repair kits (upto M12, 1/2") and is extremely simple to use (apply only in through out Holes) .

Inserting Tool
service-IMAGE

Range: M2 to M36 & 1/8" to 1.1/2"

Type: Hand Installation Tool, Pre-winder Installation Tool, Machine Installation Tool, Hex Drive Installation Mandrel,Pneumatic Installation Tool

Powercoil Range Kit
service-IMAGE

POWERCOIL has developed a thread repair range kit covering the majority of sizes commonly in use today. Powercoil Range Kit contain a HSS STI tap, Installation tools, some precision

Loksert Reduce Diameter Inserts
service-IMAGE

Install with standard drills and taps.

Important Use tap and drill specified in table.

Tap-drill hole tolerance should be -.001/ .004 (-.001/ .005 above .500 dia).

Sti Hss Tap
service-IMAGE

Powercoil taps differ from standard taps dimensionally and only Powercoil Screw Thread HSS (STI) Taps are suitable for use with Powercoil Wire Thread Inserts. Powercoil taps are manufactured to precise standards from either High Speed Steel (HSS) or (HSS-E) with ground threads and are available with taper, intermediate and bottoming leads.

Buy Now
Wire Thread Inserts
service-IMAGE

Wire thread screw inserts are larger in diameter before installation than the Tapped hole. During installation the inserting tool tightens the insert which reduces the diameter of the leading coil so it can enter the tapped hole. After installation, each high tensile stainless steel coil expands outward against the tapped hole to permanently anchor the insert.